a4angle-leftangle-rightarrow-rightcalculatoracqua_potabileacqua_sanitariaaltre_applicazioniantincendioaria_compressagasindustrialeraffreddamentorefrigerazione_industrialeriscaldamentosanitariesolarecartcert-cncert-dvgwcheckchecklistclosecloud-downloaddimensiondownloadgiallogrigionerorossosecurfraboverdeemailfacebookfacilityflickrfrabo-markergas-pn5gearsgoogle-plush2oinfoinstagramlevelslinkedinlogo-frabo-bannerlogo-frabo-mainlogo-frabomarkeracciaio_carbonioacciaio_inossidabilebronzoottonerametecnopolimeromedia-playmoleculenavPDF iconPDFPDFpipeplusquestion-markraccordo-blackraccordoresize-smallscatolasending-envelopeshare-emailshare-facebookshare-google-plusshare-pinterestshare-twittersharetwitterunico-esclusivouservwindowwrenchyoutube

Serie 2000PLUS

Brass compression fittings with O-Ring seal
Serie 2000PLUS

Serie 2000PLUS

Brass compression fittings of SERIE 2000PLUS are suitable both for gas and water systems. Thanks to the unique O-Ring, the installation time is reduced and the flexibility in the event of repositioning the fittings is guaranteed by the presence of the split ring and the washer (3 pieces). 

Brass compression fittings of SERIE 2000PLUS are suitable for all types of copper pipe according to EN 1057 standard and they are in compliance with  EN 681-1 and EN 549, and are therefore suitable for contact with drinking water. 

For more detailed information on products installation and fields of application, it is necessary to refer to the technical data sheets available in the DOWNLOAD section of the website.

JOINING TECHNIQUES DIMENSIONS MATERIAL
Compressione Compression diametro From 8 to 28 mm

Ottone Fitting body, washer and split ring in brass

Elastomer

MATERIAL COLOUR  
HNBR Grey HNBR_grigio

Pipes to be used

Copper pipes for sanitary installations according to EN 1057

Standards compliance

  • EN 1057
  • UNI EN 12164
  • UNI EN 12165
  • UNI EN 549
  • UNI EN 681-1
  • UNI EN1254-2
  Fields of application Pmax
(bar)
Tmin-Tmax
acqua_sanitaria Sanitary water 16 0°/+95°C
acqua_potabile Drinking water 16 0°/+95°C
riscaldamento Heating 16 0°/+95°C
raffreddamento Cooling 16 0°/+95°C
aria_compressa

Oil free compressed air (residual oil < 5 mg/m³)

up to 10 30°C
gas Gas 1 70°C

Maximum pressures and working temperatures are in accordance with EN-1254-2.

For use in applications outside the scope of this table, the advice of the manufacturer should be asked.

  • Extremely simple to install;
  • No need for expensive installation equipment;
  • High strength of the fittings guaranteed by the use of brass;
  • Parts can be disassembled by simply loosening the fastening nut;
  • Fittings can be reused (only for water installations and after checking that the gasket is intact);
  • The fitting tolerances of each component to the copper pipe are carefully designed to ensure optimum assembly conditions and perfect junctions quickly and safely;
  • A wide range offering quick and simple solutions in any situation.
  • pdf
    1- Technical Data Sheet - Frabo SERIE 2000PLUS
  • pdf
    2- Declaration of Conformity - Frabo Serie 2000PLUS

ask informations about this product line

Read policy information
Read policy information