a4angle-leftangle-rightarrow-rightcalculatoracqua_potabileacqua_sanitariaaltre_applicazioniantincendioaria_compressagasindustrialeraffreddamentorefrigerazione_industrialeriscaldamentosanitariesolarecartcert-cncert-dvgwcheckchecklistclosecloud-downloaddimensiondownloadgiallogrigionerorossosecurfraboverdeemailfacebookfacilityflickrfrabo-markergas-pn5gearsgoogle-plush2oinfoinstagramlevelslinkedinlogo-frabo-bannerlogo-frabo-mainlogo-frabomarkeracciaio_carbonioacciaio_inossidabilebronzoottonerametecnopolimeromedia-playmoleculenavPDF iconPDFPDFpipeplusquestion-markraccordo-blackraccordoresize-smallscatolasending-envelopeshare-emailshare-facebookshare-google-plusshare-pinterestshare-twittersharetwitterunico-esclusivouservwindowworkup-stampwrenchyoutube

Serie 2000PLUS

Brass compression fittings with O-Ring seal
OT2130

OT2130

Tee branch, Rp thread

JOINING TECHNIQUES DIMENSIONS MATERIAL
Compressione Compression diametro From 8 to 28 mm

Ottone Fitting body, washer and split ring in brass

Elastomer

MATERIAL COLOUR  
HNBR Grey HNBR_grigio

Pipes to be used

Copper pipes for sanitary installations according to EN 1057

Standards compliance

  • EN 1057
  • UNI EN 12164
  • UNI EN 12165
  • UNI EN 549
  • UNI EN 681-1
  • UNI EN1254-2
  Fields of application Pmax
(bar)
Tmin-Tmax
acqua_sanitaria Sanitary water 16 0°/+95°C
acqua_potabile Drinking water 16 0°/+95°C
riscaldamento Heating 16 0°/+95°C
raffreddamento Cooling 16 0°/+95°C
aria_compressa

Oil free compressed air (residual oil < 5 mg/m³)

up to 10 30°C
gas Gas 1 70°C

Maximum pressures and working temperatures are in accordance with EN-1254-2.

For use in applications outside the scope of this table, the advice of the manufacturer should be asked.

  • Extremely simple to install;
  • No need for expensive installation equipment;
  • High strength of the fittings guaranteed by the use of brass;
  • Parts can be disassembled by simply loosening the fastening nut;
  • Fittings can be reused (only for water installations and after checking that the gasket is intact);
  • The fitting tolerances of each component to the copper pipe are carefully designed to ensure optimum assembly conditions and perfect junctions quickly and safely;
  • A wide range offering quick and simple solutions in any situation.
  • pdf
    1- Technical Data Sheet - Frabo SERIE 2000PLUS
  • pdf
    2- Declaration of Conformity - Frabo Serie 2000PLUS

inquire about this product

to part A) of the policy
Attention, it is necessary to express consent to continue
You need to make a choice to continue
to part B) of the policy
You need to make a choice to continue