FRABOPRESS 316 GAS M range is suitable for gas applications such as domestic methane or LPG installations.
| Fields of application | Pmax (bar) |
Tmin-Tmax | |
|---|---|---|---|
 |
Gas | 5 | -20°/+70°C |
FRABOPRESS 316 GAS M
Stainless steel press fittings - M profile
GM0130
F/F/F tee
| PRESSING SYSTEM | DIMENSIONS | MATERIAL | CERTIFICATIONS |
|---|---|---|---|
 M Profile |
 From 15 to 54 mm |
|
Elastomer
| MATERIAL | COLOUR | T MIN / T MAX | |
|---|---|---|---|
| HNBR | Yellow | -20° / +70° C |  |
Pipes to be used
Austenitic stainless steel X2CrNiMo17-12-2 AISI 316L (material 1.4404) chemical composing according UNI EN 10088-1
Standards compliance
- DVGW GW541
- UNI 11179
- UNI 11528
- UNI 7129
- UNI EN 10088-1
- UNI EN 10226-1
- UNI EN 10312
- UNI EN 549
Marks
GAS DVGW
GAS: Indicates that the product is suitable for gas supply systems
PN: Followed by a pressure value in bars, indicates the max. operating pressure for gas installations
GT: Followed by a pressure value in bars, indicates that the part can withstand that pressure for 30 minutes at 650°C with an allowable leak of less than 30 dm³/hour (UNI 11065)
MOP5: Maximum operating pressure until 5 bar (methane 1 bar, LPG 5 bar)
- Thanks to the yellow mark, present on each fitting, gas application suitability is immediately detected.
- Easy and quick installation, typical of pressing technique.
- Excellent corrosion resistance.
- Excellent hydraulic and mechanical seal.
- Reduced thermal dilatations of the plant.
- Gaskets can be fitted without welding, eliminating the risk of fire in more hazardous situations (working in older buildings, furnished rooms, etc.).
- No need for dangerous gas pumps or containers, completely eliminating the need to make the connections required by law.
- Elimination of all welding materials, with inevitable cost benefits.
- Junctions free from burning or rings with an excellent immediate visual impact.
- Integrity of pipe insulation thanks to the absence of heat sources.
- Increased wall thickness to ensure the reliability and durability of junctions and fittings.
- Secure pipe-to-fitting connection thanks to the cylindrical guide on fittings both in front of and behind the O-ring.
- Polygon-shaped press designed to ensure maximum resistance to traction and torsion stresses.
- Precision cleaning of internal surfaces to eliminate oily residues due to processing and to ensure protection against rust under all operating conditions.
-
pdf
1- Technical Data Sheet - FRABOPRESS 316 GAS M Download -
pdf
2- Technical Catalogue - FRABOPRESS 316 GAS M Download -
pdf
3- Certification DWGW - FRABOPRESS 316 GAS M Download -
pdf
3- Certification OVGW - FRABOPRESS 316 GAS M Download -
pdf
3- Certification SVGW - FRABOPRESS 316 GAS M Download -
pdf
4- Leaflet M profile Download -
pdf
5- Installation tools approved by Frabo - M profile Download
PRESSING TOOLS APPROVED BY FRABO FOR GAS INSTALLATIONS
| Dimensions | Manufacturer | Pressing Tool | Jaws/Chains |
|---|---|---|---|
| 12-35 mm | Novopress | AFP101 ACO102 ACO103 |
PB1 jaws M profile 12-35 mm |
| 12-54 mm | Novopress |
ECO201/202/203 |
PB2 ECOTEC jaws M profile 12-35 mm Chains M profile 42 and 54 mm (with ZB201/203 adaptor) "Snap on" chains M profile 42 and 54 mm (with ZB201/ZB203 adaptor) |
| 42-54 mm | Novopress | ECO301 ECO3 Pressmax |
Chains M profile 42 and 54 mm (with ZB302/ZB303 adaptor) "Snap on" chains M profile 42 and 54 mm (with ZB303 adaptor) |
| 12-35 mm | Rothenberger | Romax Compact Romax Compact TT |
Romax Compact jaws M profile 12-35 mm |
| 12-54 mm | Rothenberger | Romax 3000 Romax 4000 Romax AC ECO |
Rothenberger jaws M profile 12-35 mm "Snap on" chains M profile 42 mm and 54 mm (with ZBS1 adaptor) |
| 12-35 mm | Klauke | Mini MAP2L Klauke Mini |
Klauke mini jaws 12-35 mm (KSP3) and 35 mm jaw (KSP3) |
| 12-54 mm | Klauke | UAP2 UNP2 UP75 UAP3L UAP4 UAP4L |
Klauke jaws: 12-35 (KSP3) and 42-54 chains (KSP3) with SBK4254 adaptor |
| 12-35 mm | REMS | Mini Press ACC | REMS Mini Press jaws M profile 12-35 mm |
| 12-54 mm | REMS | Powerpress (2000) Powerpress E Powerpress ACC Akku-Press Akku-Press ACC |
REMS Press jaws M profile 12-35 mm Chains M profile 42-54 mm |
