Carbon steel
| Application | Pmax (bar) |
Tmin-Tmax | |
|---|---|---|---|
 |
Heating (closed circuit) |
16 | 0°/+110°C |
 |
Cooling (closed circuit) |
16 | -10°/+110°C |
 |
Oil free compressed air (residual oil < 5 mg/m³) |
up to 16 | 30°C |
 |
Sprinkler | 16 | 30°C |
Frabopress C-Steel Securfrabo
Galvanized carbon steel press fittings| PRESSING SYSTEM | DIMENSIONS | MATERIAL | CERTIFICATIONS |
|---|---|---|---|
 V Profile |
 From 12 to 54 mm |
|
|
Elastomer
| MATERIAL | COLOUR | T MIN / T MAX | |
|---|---|---|---|
| EPDM | Black | -10° / +110° C |  |
Pipes to be used
The system pipes are electro-welded using hot zincplated strip with an extra layer of zinc over the soldering. They are therefore zinc-plated inside and outside, hence guaranteeing maximum protection against corrosion. Pipes with only outside galvanisation are also available.
Standards compliance
- UNI 11179
- UNI EN 10226-1
- UNI EN 10305-3
Marks
Not suitable for drinking water
The system IS NOT SUITABLE FOR DRINKING WATER, as highlighted on each piece by the special red marking
The system is suitable for closed circuit installations
Securfrabo
Indicates the presence of Securfrabo safety system: if fitting is not pressed, the particolar shape of the O-Ring immediately shows the water leakage
- Quick cold connection
- Lightness of the piping which means easy assembly and cheap installation
- Performance that can cover a large number of civil and industrial applications
- Installations carried out with FRABOPRESS C-STEEL SECURFRABO do not need any further pipe protection or painting (with the exception of the envisaged insulation activities)
- FRABOPRESS C-STEEL system is equipped with the innovative SECURFRABO system for detecting leaks on unpressed fittings, which constitutes a precious feature for safe testing and for identifying any lack of pressing.
-
pdf
1- Technical Data Sheet - Frabopress C-Steel Securfrabo Download -
pdf
2- Data Sheet - Frabopress C-Steel Securfrabo Download -
pdf
3- Technical Catalogue Frabopress C-Steel Download -
pdf
4- Certification CSTB - Frabopress C-Steel Securfrabo Download -
pdf
5- Certification Institut Za Varilstvo - Frabopress C-Steel Securfrabo Download -
pdf
7- Certification SZU - Frabopress C-Steel Securfrabo Download -
pdf
8- Certification VdS - Frabopress C-Steel Securfrabo Download -
pdf
9- Installation tools approved by Frabo Download
PRESSING TOOLS APPROVED BY FRABO FOR SANITARY WATER AND HEATING INSTALLATIONS
| Dimensions | Manufacturer | Pressing Tool | Jaws/Chains |
|---|---|---|---|
| 12-28 mm | Novopress | AFP101 (9.6 V) ACO102 (12V) |
PB1 jaws FB and V profiles: 12-28 mm (AFP101/ACO102) |
| 12-54 mm | Novopress |
ECO201/202/203 (230V) |
PB2 ECOTEC jaws FB and V profiles: 12-35 mm Frabo chains 42 and 54 mm (with ZB201/203 adaptor) "Snap on" chains Frabo 42 and 54 mm (with ZB201/ZB203 adaptor) |
| 42-54 mm | Novopress | ECO301 (230V) ECO3 Pressmax (230V) |
Frabo chains 42 and 54 mm (with ZB302/ZB303 adaptor) "Snap on" chains Frabo 42 and 54 mm (with ZB303 adaptor) |
| 12-28 mm | Rothenberger | Romax Compact (12V) | Romax Compact jaws: 12-28 mm |
| 12-54 mm | Rothenberger |
Romax Pressliner (12V) |
Rothenberger jaws: SV 12-54 mm "Snap on" chains SV42 and SV54 mm (with ZBS1 adaptor) |
| 12-28 mm | Klauke | Mini (9,6V) MAP2L Klauke Mini (18V) |
Klauke mini jaws 12-28 mm (KSP4) or 28 mm jaw (KSP4) |
| 12-54 mm | Klauke | UAP2 (12V) UNP2 (230V) UP75 (12V) UAP3L (18V) UAP4 (12V) UAP4L (18V) |
Klauke jaws: 12-54 (KSP4) and 42-54 chains (KSP4) with SBK4254 adaptor Novopress chains: 42-54 mm and ZB201/ZB203 adaptor |
| 12-54 mm | Ridgid | RP 10-S (230V) RP 300 (230V) RP 300-B (12V) RP 10-B (12V) |
Ridgid jaws: 12-54 mm |
| 12-35 mm | REMS | Mini Press ACC (12V) | REMS Mini Press jaws: 12-35 mm |
| 12-54 mm | REMS | Powerpress (2000) (230V) Powerpress E (230V) Powerpress ACC (230V) Akku-Press (12V) Akku-Press ACC (12V) |
REMS Press jaws: 12-54 mm Novopress jaws PB2 12-35 mm and 42-54 mm chains (with ZB201/ZB203 adaptor) |
| 12-35 mm | Roller | Multi-Press Mini ACC (12V) | Roller Press Mini jaws: 12-35 mm |
| 12-54 mm | Roller | Roller Uni-Press (230V) Uni-Press E (230V) Uni-Press ACC (230V) Multi-Press (12V) Multi-Press ACC (12V) |
Roller jaws: 12-35 mm Novopress jaws (PB2 V profile) 12-35 mm and 42-54 mm chains V profile (with ZB201/ZB203 adaptor) |
| 12-54 mm | Nussbaum | Type 5A Type 5 | Jaws Nussbaum: 12-54 mm |
| 12-28 mm | Viega | Picco | Viega Picco jaws: 12-28 mm |
| 12-54 mm | Viega | Pressgun 4E (18V) Pressgun 4B (230V) PT3-EH (230V) PT3-AH (12V) PT2-EH (230V) |
Viega PT2 jaws: 12-54 mm |
| 12-54 mm | Geberit | PWH 75 | Novopress jaws FB profile:12-35 mm Novopress-Frabo chains 42 and 54 mm (with ZB201/203 adaptor) |