FRABOPRESS C-STEEL BIG-SIZE is a system of carbon steel pipes and pressfittings available in a dimensional range between 66,7 and 108 mm.
The zinc plating applied to EN 10305 pipes and fittings guarantees higher corrosion resistance, ensuring reliability over time.
FRABOPRESS C-STEEL BIG-SIZE pressfittings are made of carbon steel (material nr. 1.0034) and are electrolytically zinc plated.
The sealing gasket is in high-quality EPDM. The threads comply with UNI EN 10226-1 standard.
For more detailed information on products installation and fields of application, it is necessary to refer to the technical data sheets available in the DOWNLOAD section of the website.
| PRESSING SYSTEM | DIMENSIONS | MATERIAL | CERTIFICATIONS |
|---|---|---|---|
 M Profile |
 From 67 to 108 mm |
|
| MATERIAL | COLOUR | T MIN / T MAX | |
|---|---|---|---|
| EPDM | Black | -10° / +110° C |  |
The system pipes are electro-welded using hot zincplated strip with an extra layer of zinc over the soldering. They are therefore zinc-plated inside and outside, hence guaranteeing maximum protection against corrosion. Pipes with only outside galvanisation are also available.
The system IS NOT SUITABLE FOR DRINKING WATER, as highlighted on each piece by the special red marking
The system is suitable for closed circuit installations
FRABOPRESS C-STEEL BIG-SIZE range is perfect for the installations of closed-circuit heating/cooling systems, closed-circuit water systems, firefighting systems (sprinkler), compressed-air systems and distribution of inert gases.
| Fields of application | Pmax (bar) |
Tmin-Tmax | |
|---|---|---|---|
 |
Heating (closed circuit) |
10 | 0°/+110°C |
 |
Cooling (closed circuit) |
10 | -10°/+110°C |
 |
fino a 10 | 30°C | |
 |
Industrial installations | ||
 |
Sprinkler | 10 | Tmax 30°C |
|
pdf
|
1- Technical Data Sheet - FRABOPRESS C-STEEL BIG-SIZE | Download |
|
pdf
|
3- Frabo installer training manual - UK Market | Download |
|
pdf
|
3- Technical Catalogue - FRABOPRESS C-STEEL BIG-SIZE | Download |
|
pdf
|
4- Certification Institut Za Varilstvo - FRABOPRESS C-STEEL BIG-SIZE | Download |
|
pdf
|
4- Certification QB (CSTB) - FRABOPRESS C-STEEL BIG-SIZE | Download |
|
pdf
|
4- Certification SZU - FRABOPRESS C-STEEL BIG-SIZE | Download |
|
pdf
|
5- Big-Size - Installation tools approved by Frabo | Download |
|
docx
|
6- Specification - FRABOPRESS C-STEEL BIG-SIZE | Download |
| Dimensions | Manufacturer | Pressing Tool³ | Chain³ |
|---|---|---|---|
|
76,1 mm 88,9 mm 108 mm |
Novopress |
ECO301 (230V) ECO3 (230V) |
Adaptor: ZB323¹ / ZB324² + Press Collars: M-Profile “SNAP-ON” or Classic (Round with fastening) Adaptor: ZB321¹ / ZB322² + Press Collars: M-Profile Classic (Round with fastening) |
|
76,1 mm 88,9 mm 108 mm |
Novopress |
ACO202XL ACO203XL |
Adaptor: ZB221¹ / ZB222² + Press Collars: MProfile “SNAP-ON” Adaptor: ZB221¹ / ZB222² + Press Collars: MProfile Classic (Round with fastening) |
|
76,1 mm 88,9 mm 108 mm |
Klauke | UAP4L | Adaptor: SBKUAP4 + Press Collars: M-Profile Press Collar model LP |
|
76,1 mm 88,9 mm 108 mm |
Klauke | UAP100L | Press Collars: M-Profile Press Collar model HP |
¹ to be used for diameter 76,88.9 and for the 1st pressing action on diameter 108;
² to be used for the 2 nd pressing action on diameter 108;
The tools and the chains must be operated and maintained according the manufaturer’s specification.
